亲自线刷云网行CR13S固件步骤分享大家
前些天我刷云网行CR13S固件这里分享一下步骤希望能帮助到你首先去官网下载对应固件版本，再下载刷机驱动，这里就不给下载链接了
http://data.znds.com/attachment/forum/201503/17/182639pkrrzjjkpmpkb46b.png
再安装驱动
http://data.znds.com/attachment/forum/201503/17/182854gxqfjzmr0hmcac3c.png
打开驱动
http://data.znds.com/attachment/forum/201503/17/183028mua777wu8p1p75h5.jpg
选择刚刚下载的固件
http://data.znds.com/attachment/forum/201503/17/183150pemm91tvrvqqzja3.jpg
连接USB盒子端一定连接天线一边端口，另一端连接电脑USB,在电源也链接上
http://data.znds.com/attachment/forum/201503/17/181832anon2oxnhgn7hptc.jpg
指定成功后，会检测固件，检测完成，就可以操作了
http://data.znds.com/attachment/forum/201503/17/184958phci6tnhnilvnlac.png
用牙签顶住reset口
http://data.znds.com/attachment/forum/201503/17/185213g2fd3tdftcy3o474.jpg
成功后显示，拔掉接电视去
http://data.znds.com/attachment/forum/201503/17/185346ukjj2e2w202rej5j.jpg
接电视第一次记得根据电视调整分辨率
http://data.znds.com/attachment/forum/201503/17/185545rfns2nhnss2wwomz.jpg
成功了
http://data.znds.com/attachment/forum/201503/17/185714sc0j49q9npjtykpi.jpg
到这里有没有掌声响起来，同学们清楚了吗？反正我是明白了！！！
楼主辛苦，强烈支持
页:
[1]
